EnviroMix is focused on providing treatment products designed to create uniformly mixed solids throughout the basin. The product intelligence allows operators to set mixing sequences based on multiple variables including flow rate, depth, total treatment area, and more.
All EnviroMix installations provide mixing in liquids by introducing short bursts of compressed air through engineered nozzles affixed to the floor of the tank or reactor. Electrical power requirements are limited to the power to operate the compressed air source and the programmable logic controllers in the EnviroMix control panels.
The EnviroMix control panel incorporates programmable logic controllers (PLCs) which control the firing of the air control valves. While the controllers allow a system operator to vary the settings of these mixing parameters at any time, in practice, the parameters are set for optimum performance and not changed.) The control panel is powered by 110-VAC which is converted to 24VDC for all internal components including the PLC. Other than the compressed air source (compressor or blower as appropriate), this is the only power draw of the system at the tank.
Standard Equipment profile:
- Air compressor with electrical supply from existing panel (480 VAC, 3 ph) assumed to be within 100' of compressor placement
- Air accumulator tank and associated fittings and supports
- Air supply piping and associated fittings (optional for industrial applications)
- System controllers (including electrical connection to 110 VAC power source)
- Air control valves
- Air distribution piping and associated fittings and supports (optional for industrial installations)
- Air injection nozzles
|
|
